how to repair burn marks on benchtops in Canberra

To repair burn marks on benchtops, start by cleaning the area with a mild detergent and water. Next, gently sand the burn mark with fine-grit sandpaper, being careful not to damage the surrounding surface. For deeper burns, consider filling the area with a laminate repair filler and sanding it smooth. Finally, polish the area to match the rest of the benchtop. For more severe burns, consider refinishing the entire benchtop. 

Here's a more detailed breakdown:

1. Cleaning and Assessment:

• Clean the burn mark with a mild detergent and water to assess the extent of the damage. 

• Use a scourer (green side) with soap and water to scrub the burn mark, then finish with a yellow foam side. 

2. Sanding:

• Use fine-grit sandpaper (like 400 grit) to gently sand the burn mark, working in a straight, left-to-right motion.

• Be cautious not to over-sand and reveal the base material. 

3. Filling (if necessary):

• If the burn mark is deep, use a laminate repair filler to fill the damaged area. 

• Mix well and apply the filler slightly larger than the burn, then smooth it out. 

• Once dry, sand it again to match the surrounding surface. 

4. Polishing and Refinishing (if necessary):

• Polish the repaired area to match the surrounding benchtop. 

• For more extensive damage, consider refinishing the entire benchtop with Dulux Renovation Range, which is specifically designed for laminate surfaces.

  
  
  
  

  

  
  

5. Additional Tips:

• For stubborn marks, use a melamine eraser with water. 

• Consider using a sample pot of paint matching the benchtop color for touch-ups. 

• If the damage is very severe, consider professional repair or replacement